Introducing the X-Stream xP90-100 Intensifier Pump - 90,000PSI! Capable of producing pressures in excess of 90,000psi, the 100hp X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi pumps, enabling users to increase productivity and reduce part costs.
The X-Stream produces 50% more pressure than a 60,000psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi continuous operating pressure. Compared to a 60,000psi pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 1.45gpm and supports up to a .017" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology.

Construction
· Heavy gauge sheet metal covers
· Rugged all-steel welded framework
· Hinged cover and removable access panels for convenient machine inspection and maintenance
· Integral hydraulic reservoir
· Sound insulated for quiet operation
· NEMA 12/13 rated electrical enclosure

Standard Features
· High efficiency TEFC motor
· 1,500 or 1,800 nominal motor speed (rpm)
· Electronically shifted intensifiers
· Wye-Delta soft start with disconnect
· Fail-safe high-pressure attenuator
· Safety shutdown systems
· Automatic safety pressure bleed-down valve
· Thermostatically controlled cooling system
· Programmable Logic Controller (PLC) for operation and safety monitoring
· Axial piston, variable displacement, pressure-compensated hydraulic pump
· Liquid-filled pressure gauges
· UHP safety shielded tubing

Product Specifications
Physical Size
· Length: 86 in (218 cm)
· Width: 40 in (102 cm)
· Height: 55 in (140 cm)
· Approximate Weight with Fluid: 4,900 lbs. (2,222 kg)

Electric Motor
· Motor Output: 100 hp (75 kw)
· Motor Type: High Efficiency TEFC electric motor
· Full load amps @ 460vac: (60Hz) 119
· Full load amps @ 230vac: (60Hz) 238

Intensifier
· Type: Single piston, dual plunger, reciprocating
· Number of Intensifiers: Two
· Rated Pressure: 90,000 static psi (6,200 bar)
· Intensification Ratio: 25:1
· Flow Rate: 1.45 gpm (5.49 lpm)
· Maximum Rated Orifice Size: 0.017" (0.43mm)
· 100,000 PSI-rated fittings and tubing
· Supports 75K+ continuous operating pressure
Low-Pressure Water/Intensification Water
· Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM
· Supply Requirements: 2.0 gpm @ 20 psi (1.4 bar ) min. / 75°F (24°C) max
· Filtration: 10, 1, .45 Micron

Coolant Water
· Maximum Temperature: 70°F (21°C)
· Minimum: 0-10.0 gpm (0-37.9 lpm) @ Minimum 20 psi (1.3 bar)
· Ability to Remove: 95,000 BTU's / Hour
· Heat Exchanger: Shell and Tube (2)

Hydraulics
· Reservoir Capacity: 55 gallons (209 liters)
· Filtration: Full Flow 10 Micron

Environmental
· Ambient Room Temperature: 50°-100°F (10°-37°C)
· Relative Humidity: Noncondensing, Maximum 95% @ 100°F