Accessories:

› Accessories Home

Accessories Water Jet:

› Accessories 1®

› New! Accessory 2

› Accessory 3 (POL)

› Accessory 4

› Accessory 5

› Accessory 6

› Accessory 7

› Accessory 8

› Accessory 9

› Accessory 10

› Accessory 11

› Accessory 12

› Accessory 13

› Accessory 14

› Accessory 15

› Accessory 16

› Accessory 17




Under Construction®
J. R. Jet Chiller Systems

Chiller Systems spec sheet (PDF) [size Kb]

Inlet water being fed to the pump is required to be 70° F or below. If inlet water temperature is above 70° F a Chiller will cool the water for the pump. Depending on the rating of the chiller and ambient conditions, the water temperature being fed to the pump can be lowered anywhere from 20° to 40°.

Water from the chiller's charge pump is sent through the chiller and to the waterjet pump. A portion of the water is recirculated back to the chiller's internal charge tank to minimize water usage.

In the event that water temperature exceeds 70°F on a seasonal or regular basis, shortened seal life of the HP pump can occur. A chiller cools this incoming water which in turn improves seal life.



Standard Features
  • 12,000 BTU/hr chillers are available three phase 460 VAC (4 Amp).
  • 24,000 BTU/hr chillers are available three phase 460 VAC (7 Amp).
  • Designed for 50° to 125° ambient temperature.
  • All wetted component made from non-ferrous material.
  • All connecting hardware supplied
  • Digital temperature readout.
Footprints

12,000 BTU/hr: 25.5" long x 42" wide x 47" high footprint; weight 325 lbs.
24,000 BTU/hr: 25.5" long x 42" wide x 47" high footprint; weight 350 lbs.

Chiller are not manufactured by Jr Jet but are provided as an option to
the customer. Information regarding the necessary size of the Chiller will be
provided with the purchase of the pump.
contact 900 Spalding Hollow Rd, Howardstown, KY, 40051 USA phone: 502-549-3660 Fax: 502-549-5680