J. R. Jet JetMachining Centers

› PumpMachine Types

› NEW! Custom Design for Pump

› Pump iP55-30

› Pump iP60-50

› Pump iP55-75

› Pump iP55-100

› Pump iP55-150

› Pump iP55-200

› Pump xP90-100

Additional Information for Download:

Pump 55,000psi 30HP Spec Sheet (PDF)

Pump 60,000psi 50HP Spec Sheet (PDF)

Pump 55,000psi 75HP Spec Sheet (PDF)

Pump 55,000psi 100HP Spec Sheet (PDF)

Pump 55,000psi 150HP Spec Sheet (PDF)

Pump 55,000psi 200HP Spec Sheet (PDF)

Pump 90,000psi 100HP Spec Sheet (PDF)

Verbage to be added

J. R. Jet^® Machining^® Centers

J.R. Jet sell the 100hp X-Stream xP90-100 which is capable of producing pressures in excess of 90,000psi. It supports a 75,000psi continuous operating pressure. It has a flow rate of 1.45gpm (5.49lpm).

J.R. Jet sells the iP60-50 which is a 50-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.1 gallons (4.1 liters) per minute to a variety of cutting, cleaning or surface preparation tools.

J.R. Jet sells the iP55-30 which is a 30-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi with flow rates of 0 to .65 gallons (2.5 liters) per minute to a variety of cutting, surface preparation or cleaning tools.

J.R. Jet sells the iP55-75 which is a 75-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 1.5 gallons (5.7 liters) per minute to a variety of cutting, surface-preparation or cleaning tools.

J.R. Jet sells the iP55-100 which is a 100-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (3,800 bar) with flow rates of 0 to 2.0 gallons (7.6 liters) per minute to a variety of cutting, surface preparation or cleaning tools.

J.R. Jet sells the iP55-150 which is a 150-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (4,100 bar) with flow rates of 0 to 3.2 gallons (12.11 liters) per minute to a variety of cutting, surface preparation or cleaning tools.

J.R. Jet sells the iP55-200 which is a 200-horsepower intensifier pump rated at 60,000 psi (4,100 bar). It is capable of producing output pressures from 1,000 to 55,000 psi (4,100 bar) with flow rates of 0 to 4.0 gallons (15.2 liters) per minute to a variety of cutting, surface preparation or cleaning tools.